Henan Lianghe Pipeline Equipment Co.,Ltd
Henan Lianghe Pipeline Equipment Co.,Ltd
Add to Cart
ANSI Standard Stainless Steel High Pressure Pipe Repair Clamps
Product Introduction
The FCH Patcher is a pipe connection patcher with an advanced toothed retaining ring (strip) design that provides axial tension resistance to the pipe. This design allows FCH patchers to replace a variety of connection methods such as flanges, welding, threaded connections, slay-plug connections and grooved joints. The FCH patcher ensures that fluids, gases and solids do not leak by moving fluids, gases and solids under pressure in the equilibrium pipe, so that the sealing lip is stressed as the pressure increases. In addition, the sealing ring retains a good elastic state with low external extrusion force, which prolongs the service life.
Product Advantages
1. Advanced toothed fixing ring (clamp strip) design
2. Excellent sealing performance
3. Wide range of application
4. Easy to install
5. Strong corrosion resistance
6. Long service life
7. Flexible installation
Product parameters
| Pipe OD (mm) | Pipe Diameter Range(mm) | PN | Dimensions | Bolt | Bolt torque | |
| L1 | D | |||||
| 18 | 17-19 | 16 | 57 | 35 | 6 | 10 |
| 21.7 | 21-23 | 16 | 57 | 45 | 6 | 10 |
| 25 | 24.5-25.5 | 16 | 57 | 50 | 6 | 10 |
| 27.2 | 26-28 | 16 | 57 | 50 | 6 | 10 |
| 32 | 31.5-32.5 | 16 | 57 | 55 | 6 | 10 |
| 34 | 33-35 | 16 | 57 | 55 | 6 | 10 |
| 40 | 39.5-41.5 | 16 | 57 | 55 | 6 | 10 |
| 42 | 42-44 | 16 | 57 | 65 | 6 | 15 |
| 44.5 | 44-45.1 | 16 | 57 | 65 | 6 | 15 |
| 48.6 | 47-49 | 16 | 57 | 70 | 6 | 15 |
| 54 | 53.6-54.6 | 16 | 57 | 70 | 8 | 30 |
| 57 | 56.3-57.7 | 16 | 57 | 80 | 8 | 30 |
| 60.3 | 59-62 | 16 | 80 | 85 | 8 | 30 |
| 63 | 62.2-63.9 | 16 | 80 | 85 | 8 | 30 |
| 76.1 | 76-78 | 16 | 80 | 100 | 8 | 30 |
| 79.9 | 78.8-80.8 | 16 | 80 | 100 | 8 | 30 |
| 88.9 | 88-92 | 16 | 107 | 110 | 10 | 50 |
| 108 | 106-110 | 16 | 107 | 130 | 10 | 50 |
| 110 | 108.9-111.2 | 16 | 107 | 130 | 10 | 50 |
| 114.3 | 112-116 | 16 | 107 | 135 | 10 | 50 |
| 118 | 116.6-119.2 | 16 | 107 | 140 | 10 | 50 |
| 125 | 123.6-126.5 | 16 | 107 | 150 | 10 | 50 |
| 133 | 131.5-134.4 | 16 | 107 | 160 | 10 | 50 |
| 140 | 137-143 | 16 | 116 | 165 | 12 | 80 |
| 159 | 157-161 | 16 | 116 | 185 | 12 | 80 |
| 165.2 | 163.3-166.7 | 16 | 116 | 190 | 12 | 80 |
| 168 | 166-170 | 16 | 116 | 195 | 12 | 80 |
| 170 | 168.2-171.9 | 16 | 116 | 195 | 12 | 80 |
Tips:The above data is only part of the data, if you need a special size, please contact us.
| NO | NAME | MATERIAL | QUANTITIES |
| 1 | Back plate | SS304 | 2 |
| 2 | Rubber sleeve | EPDM | 1 |
| 3 | Bolt | SS304 | N |
| 4 | Screw hole pull rod | SS304 | 1 |
| 5 | Pin post | SS304 | 1 |
| 6 | Nut pull rod | SS304 | 1 |
| 7 | Sheel steel plate | SS304 | 2 |
Product application scenarios
FCH patchers are suitable for sealing metal pipes of various wall thicknesses, especially for industrial piping systems that require frequent repairs and replacements. Due to its design features, the FCH patcher can maintain good sealing performance under various media changes, and is suitable for chemical, pharmaceutical, marine engineering, electric power and other industries with high requirements for corrosive media.
Product installation and maintenance
The installation of the FCH patcher is relatively simple, and the pipe interface connected to the ferrule joint needs to be cleaned inside and out, and the pipe mouth is polished and smoothed to ensure that there are no burrs and uneven surfaces. There should be no bending at the embedded part of the tube and tube fitting to avoid leakage. During installation, it is necessary to tighten the ferrule step by step and avoid excessive force to ensure the sealing effect.
Different types of products
FCD connectors FCE connection patches Semi circle mini type repair clamp
FCTR connectors Stainless steel plate patches Iron single band repair clamp
Product installation process
Product Applications